Function characteristics and working principle of double NC straightening and cutting machine

The double numerical control straightening and cutting machine has the characteristics of reasonable structure, convenient operation, safety and reliability. It is suitable for the straightening of chicken cage, rabbit cage, construction mesh, various welding wires, Shule plate inserting wire cutting and special-shaped mesh wire straightening.

1. There is no error in the length of cut steel bar,

2. Double head pulling type,

3. One meter steel bar is adjusted and pulled out,

4. The construction wire adopts tungsten steel mold,

5. The ball end mold is adopted for the product wire, and the steel bar transferred out will not damage the surface.

Firstly, the motor drives the speed through the belt to make the straightening cylinder rotate at high speed. The steel bar passing through the straightening cylinder is straightened, and the rust on the surface of the steel bar is removed by the straightening die;

Through another pair of deceleration belts and gear reducer, the motor drives two transmission rollers to draw the reinforcement forward, and on the other hand, drives the crank wheel to make the hammer head move up and down.

When the steel bar is adjusted to the predetermined length, the hammer hammers the upper tool holder to cut off the steel bar. When the cut steel bar falls into the receiving frame, the cutter head will return to its original position due to the spring action to complete a cycle.