What are the functional advantages of automatic numerical control hoop bending machine

What are the advantages and functions of the full-automatic numerical control hoop bending machine? Generally, the numerical control hoop bending machine will use the frequency conversion control speed regulation and straightening method, as well as the principle of numerical control for meter counting to store. The operation power of the numerical control hoop bending machine can reach 1 to 2 stirrups each time, among which 1 hoop can be bent under the general condition of 12 mm, and about 2 hoops can be bent under the general condition of 4-10 mm It takes only 1.5 seconds to bend a stirrup. Even down, 1200 to 2400 stirrups can be reached per hour. This working power is far less than that of ordinary hoop bending machines. Due to the paste extraction of production power, it also represents the decrease of production cost in some way.

The whole operation process of the numerical control hoop bending machine can be handled through the numerical control touch screen. We can set functions on the touch screen, such as stirrup operation, plate reinforcement, angle bar and paper strip operation settings. In addition to these functions, the numerical control hoop bending machine also has the function of automatic counting and output value prompt.

In order to adjust the bending hoop, it is necessary to use the bending machine to adjust the bending bar With large manual operation cost, Yantai Hongyou CNC Equipment Co., Ltd. optimizes and plans a new automatic alignment equipment from the beginning according to the customer's application conditions, which can greatly lift the paste. The output power of the device is caused by the bending deformation formed in the tortuous operation due to the excessive stirrup.